Plasma Cutter Reviews

Made for industrial as well as domestic needs spectrum 375 X-TREME is a perfect tool for you. Its key feature is its weight. It is so lightweight ( 19 lbs ) that you can carry even two of the same kind without any hassle.

It comes with a variety of modern features. It cuts approximately 15 inches per minute with complete precision. It?s cutting capacity may increase depending upon the metal you cut.

It runs on 120/240 V input. So, you can use anywhere and everywhere without thinking about the Voltage supply you can achieve. It has a duty cycle of 40 % at 120 Volts under a temperature of 104 degrees Fahrenheit.

It comes with several electrodes and consumables within the box. It also comes with a multi-voltage cable known as Auto-line and MVP. So, it is perfect for a handyman who needs to remain dependent upon the input voltage of the sockets for their works.

Key features and description.

Build quality and design- It?s building is not much different from other similar looking plasma cutters available in the market. But with a weight of 19 lbs, it is most lightweight among those. Dimensions of 5.5 X 9 X 13.25 inches make it compact too.

It comes with XT30 Torch, which has an ergonomic handle. It never slips off your hand even if you are using it in a hurry. Also, this torch comes with a flexible cable to help you cut Metals in any orientation and through any angle.

Its fan, which is named fan on demand, is said to work on wind Tunnel Technology. This technology runs the fan only when it is needed. It protects the machine from dust, dirt, debris, or any other nano-size pollutants.

Ease of use- It is easy to carry this Cutter with one hand. Its lightweight build doesn?t mean that it is not effective while using it. It gives you faster results without much effort from your side.

While cutting expanded or metals with variable dimensions, it?s automatic pilot arc will run automatically and spot itself when needed. It will help you to avoid multiple triggers while cutting the metals.

It comes with long cables to help you work from the required distance. Also, it?s multiple input voltage supply will make it easy to find the necessary power socket for you.

Cutting mechanism- At 30 Amps, it has a rated capacity of 3/8 inch at 18 IPM on mild steel, For the metals with thermal conductivity (aluminum or other metals ) the cutting capacity may decrease up to 30 percent. Also, at 20 amps, it has a rated cutting capacity of ? in at 17 IPM.

To achieve high precision while cutting at this capacity, it requires to travel 15 inches per minute on the metal. Other features include Auto Refute Technology, which helps you to cuts expanded metals. This technology also helps to cut multiple pieces of metals in the way that it automatically switches the pilot arc when needed.

Safety features

It comes with a protective X-case to carry all your consumables, spare parts, nozzles, electrodes. But it can also be used to carry your protection glasses, gloves, jackets, helmets. If you are a handyman, you are safe to use this cutter anywhere because you can carry your safety kit along with the cutter.

Also, it?s XT30 Torch comes with an ergonomic handle, which helps you to make a perfect grip. The handle is never going to slip off your hands. Sometimes the slipping of handles can cause great damage to the life of the user, but this tool is safe enough.

It comes with a safety manual that you should consider reading to enhance your safety. If you are a first time user of a plasma cutter, then this safety manual will help you to avoid any kind of unknown damage.

Pros

Less than 9 kg of weight.Works on multiple volts.It comes with a protective X-case.It comes with several consumables and electrodes for multiple applications.A fan on-demand feature increase durability.Auto refire.Automatic air regulation maintains recommend torch pressure.

What we really liked about this cutter.

The weight of this product is something that makes it a different and unique plasma cutter. Every plasma cutter needs to be transported, whether it is used in a shop or used by a handyman. So, if it is lightweight, it will surely hive you more relief? while carrying it.

Also, it works on multiple Volts. Either you can use it at home, or you can use it in a mechanic shop. Some lightweight plasma cutters work only on 110/120 input voltage and are not considered heavy duty plasma cutters, but this product is genuinely a heavy-duty cutter.

Cons

It doesn?t come with a built-in air compressor.Price is fractionally higher than other similar plasma cuttersDoesn?t come with a protection kit ( which includes gloves, jacket, glasses, etc. )

What we really didn?t like about this cutter.

According to the price point, this plasma cutter can disappoint you. But if you notice carefully, then you will find that some plasma cutters at this price range is heavier and doesn?t come with extra consumables. So, keeping these facts in mind, this price may appear reasonable.

Who should consider buying it?

Those professionals who need to get rid of their old technology plasma cutters this cutter can be a perfect purchase to start a new journey. The professionals will like the speed of this Plasma cutter. Also, at this speed, your old Plasma cutter will not provide that much precision.

If you have a mechanic shop, then it will save your time with the help of Its automatic handle. Also, in the mechanic shops, the mechanics need to work on non-regular Metals. This machine is made to work on irregular Metals.

Also, this plasma cutter can be used for metal artwork. It makes a beautiful pattern on the metals, but the only condition is that the Plasma cutting must be recommended for the metal.

A plasma cutter generally is known for its affordability Lotos supreme LTP5000D is a perfect plasma cutter for small shop workers and do it yourself (DIY ) users. It can cut steel, aluminum, brass, copper, and other metals of variable thickness. The only condition to achieve fine cut quality is that you must use this Cutter with patience.

It has a rated average cutting capacity of an inch to an inch, but this capacity can increase depending on Upton the type of metals. It’ autopilot arc facility makes it easy to make precise cuts in slightly lesser time. It can also cut pieces of metals perfectly.

It runs on a 110/220 V Voltage range, which makes it possible to use this Cutter almost everywhere. It has a duty cycle of 60 % at 50 A, 110 V, and 60% at 50 A 220 v. It’sIt’s built-in inverter makes provides this product with easy mobility.

For hassle-free operations and lower pricing, you can consider purchasing this Plasma cutter.

Key features and description.

Build quality and design. The exterior part of this Plasma Cutter is made of strong metal, which provides it an added durability. It is made very compact in size. It has the dimensions of 15 x 6 x 12 inches, and it is made moderately lightweight ( 26 lbs ).

It comes with a basic plasma cutting torch, Ground clamp and cables, air regulator, and a few other basic things out of the box. It comes with a MOSFET transistor to provide smooth plasma every time to make sure that your metal cutting doesn’t get affected. It also helps to make fine cuts in fractions of minutes.

If you want a plasma cutter that you can consider using for years, you can consider purchasing it. It’sIt’s build quality is impressive, which gives an idea about the durability of the product.

Ease of use. You can just start working on this plasma cutter within 1 minute, how easy it is to set up. It saves a lot of time for you in setting up the machine. Also, it has several automatic features to make it easy to cut through expanded and uneven metals.

Some plasma cutter is very selective in terms of input voltage, but this works on a multi-voltage input. It saves your money in setting up a whole new input unit; you can use it everywhere with ease.

It also comes with all the required accessories to make sure that you get everything while purchasing this product. Also, it’s torch feels quite smooth to use. Your hands will not feel the fatigue of working on a plasma cutter, which is considered very stressful to hands.

Cutting mechanism. It’sIt’s autopilot arc cuts the metals without coming in the contact of the metals. This can help you a lot if you are working on painted or rusted surfaces. It can cut stainless steel, aluminum, copper, alloy steel with the help of it’sit’s compressed air Cutting mechanism.

A plasma cutter is considered perfect if it is able to cut all varieties of metals so as to make sure that it can help the professionals who need to work on different metals every day. Although this Cutter is considered perfect for low-end users and DIY users, this can help the professionals too.

Safety features. Plasma cutters are often considered dangerous, but this plasma cutter appears to be equipped with all the modern safety features. It is safer to use as compared with oxyhydrogen fuel cutters. It reduces the chance of fire-related damages.

Also, in this plasma cutter, proper insulation has been provided to ensure that you don’t get electric shocks. The torch of this Plasma cutter is also non-slippery; sometimes, a small slipping of the torch can cause a threat to the life of the worker. With all these safety features, some safety measures from your end can make this product 100% safe to use.

Pros

1. Impressive pricing for an industrial level plasma cutter.
2. Works on dual voltage.
3. Faster cutting speed.
4. 30 days replacement warranty.
5. Low power consumption.
6. It comes with a variety of accessories.
7. Good for cutting pieces of metals.
8. Metal surrounding.

What we really like about this plasma cutter.

Affordability is the groundbreaking feature of this plasma cutter. It makes it a perfect purchase if you are a first-time buyer. Also, at this price range, it’s specifications are more than required.

Some similar products at this price range have very limited applications. Some products at this price range come with a single input voltage compatibility, while some products don’t provide accessories with their products. But this product has everything which you can expect in a flagship plasma cutter.

Apart from pricing the cut quality, it gives us something that you find in a machine that costs nearly double the price of this plasma cutter. Also, to achieve that level of cut quality, you don’t need to spend much time than the other old generation plasma cutters.

Cons.

1. Slightly heavier weight than similar products having the same features.
2. Only one year warranty, some products provide 3-5 years of warranty.
3. Preferred for low-end users.
4. Power cables are not so much longer.

What we really didn’t like about this product.

The one-year brand warranty may feel less competitive if you have an idea about other similar Plasma Cutter. But the customers who have purchased this Cutter are more satisfied with this product. They consider this product to be more durable than 3-5 year cutters.

Who should consider buying it?

For DIY users and home centric users, this Plasma cutter is something that can be considered to purchase. With some high end and advanced specifications, this plasma cutter can help you if you are a professional.

Also, those workers who need to have a plasma cutter that can be set up in 1 minute, this plasma cutter is the best purchase. Also, you can buy multiples of this product for your industry if you want to increase the working capabilities by saving enough time in cutting the metals.

Hobart Airforce 21ci is ready to use a plasma cutter. It is rated to cut 1/8 inch mild steel with excellent cut quality. It also comes with an inbuilt air compressor; some other plasma cutters at this price don?t provide that.

It is a very lightweight cutter, maybe half of the weight of other cutters with the same functionality. It is a perfect cutter for household use; it can be used at an input voltage of 110 v. Its pilot arc start feature provides you with a consistent arc start to minimize burnout.

It comes with several accessories band consumables with it. It has a 3.7 m handheld torch named XT12R Torch. Also, it has a 3.7 m work cable with clamp. Its power cable is 2.1 m in length.

Its extra consumables include two tips, electrode and a standoff guide to maintaining a constant arc length. At this price range, this Cutter has everything to enhance the user experience.

Key features and description

Build quality and design- Mostly Plasma cutters nowadays are compact but are not lightweight. It is small as well as lightweight. It has dimensions of 16.5 in x 18.5 in x 11.2 in and has a weight of 31 pounds which is half the weight of other Plasma cutters in the market. It has a delicate LED indicator to know the current status of temperature, power and Torch readiness. It helps you to eliminate the downtime.

It has a duty cycle of 35 % at 102 degrees Fahrenheit, so it is good enough to be used in severe working conditions.

It?s fan only runs when required. The company calls this feature the Fan-on-demand feature. Its Torch named XT12R has more efficient cooling and provides you with a faster cutting experience.

Ease of use

It is a nearly automatic machine. You can just set up and start using this Cutter. Its Torch feels quite comfortable and finishes works quickly. For high precision, it can be trusted.

Its Torch gives a smaller heat-affected zone, to increase precision and to decrease warping. It doesn?t need gas pressure settings for flame tuning. It does Its job automatically.

Also, some cutters are not made to be carried by everyone. This Plasma cutter is one of the lightest weighing Cutter. You can just grab it with one hand and can take anywhere. It?s LED indicator also makes it easy to detect the current status of the machinery to save your time in analyzing things manually.

Cutting Mechanism

As this product is a plasma cutter so the basic mechanism of this Cutter us plasma cutting. The features given in this product are given to overcome the removable difficulties in plasma cutting.

Its features are for professionals who need High precision in metal cutting. It has a post overflow cooling circuit that cools the consumables and torch quickly after releasing the trigger to ensure the durability of the consumables.

Safety features

Plasma cutting is a very dangerous job. The workers can take safety measures, but it should be accompanied by the safety from the machine’s side as well. This machine can be trusted for that purpose.

As this machine works on the low power supply, the risk of electric shocks is relatively lesser. But the makers have taken care that no leakage of electric charge occurs.

From the metal’s safety point of view, this machine is very safe. It gives the highest level of precision in lesser time, thus saving your metal from unwanted cuts.

Also, the machine should use with proper protection. Proper covering and helmets with UV screens must be there. If all these things are taken in mind, then this cutter is 100% safe to use.

Pros of this cutter

Very lightweight. Comes with an air compressor, several cutters don?t come with an air compressor at this price. Affordable pricing. 5-year warranty. It comes with some extra consumables and electrodes. LED indicator protects from unwanted downtime. Works on a household voltage of 110 V. This cutter Comes with a post flow cooling circuit.

What we really like about this product.

The lower weight of this Cutter is the best feature of this product. This feature makes this Cutter a perfect transportable cutter. Anybody can carry without any stress to arms.

Also, this product runs on 110/115/120 V input power. This ensures that this Cutter can be used anywhere and everywhere. This overcomes the difficulties in finding a suitable power supply of 240 V or above.

Cons of this cutter

Price is affordable, but for some users who don?t need it for professional use, it may be higher. Oxyfuel cutters are of low price. Cutting quality is fine but lower than laser cutters. XT12R torch isn’t as nice as the XT40R. Works only on 110 volts

What we really didn?t like about this cutter

If you need this product for non-regular usage, then you will find that there are some other cheaper products for that purpose. But the professionals know that its features add to its cost. If you know how much these features are important to you and need high precision in Cutting, then this price may be of the lower bracket for you.

Who should consider buying it

It?s lightweight, and compact build makes it a perfect cutter for a handyman. A handyman can carry it anywhere very easily. Also, it can save a lot of time in setting the UK and other operations.

It is very durable and can run for hours. To a professional, this plasma cutter will provide a continuous operation on metals. This will also help to save your money in the long run.

Also, it?s nice cutting quality is good for artwork cutters. It is suitable for putting different beautiful designs on the metals. Although plasma cutting is considered to provide lower cutting quality than laser cutters, it?s quality is not much lower than that of laser cutters. It can be considered a universal cutter that can be used by everyone.

Lincoln electric Tomahawk 625 is a modern generation plasma cutter equipped with all the necessary and contemporary features. It gives the look of a professional cutter, but the beginners can use it too. However, for the professionals, this cutter is provided enough and extra features to make metal cutting very fast.

It can cut mild steel, stainless steel, brass, aluminum, copper with high precision. It has recommended cut performance over stainless steel as 0.51m/min ( 12.7 mm steel ). However, you can cut at a maximum of 0.13 m/min ( for 19.1 mm steel ). It is lightweight and portable enough to transport easily.

It comes with some primary electrodes and nozzles, but you can purchase other electrodes and nozzles online; those are easily available.

It is also made durable and reliable enough so that it serves you in the long run. It is given a fast-moving cooling fan to ensure that you can work for hours without caring for the damage to the cutter.

Key features and description

Build quality and design

It is very compact and lightweight. The dimensions of this Cutter are 15.2 in x 8.5 in x 18.9 in ( 385 mm x 215 mm x 480 mm ). This Cutter is also very lightweight ( 15.42 kg ); you can even carry it one hand.

It comes with a rapid air restrike feature that lets you cut through gaps and expanded metals very quickly. It works on an input power of 208/230/1/50/60. It also comes with a front panel purge control to set the airflow rates easily without initiating the plasma arc.

Its touch restart system ensures that a reliable plasma arc is initiated without high frequency.

It comes with three LED indicators, red, green, and yellow. The red one shows output status; the yellow one shows the thermal status, and the green one is power on/off indicator. It also comes with a long 20 ft ? cable to ensure that you can work in every condition.

Ease of use

The most important feature of this Cutter is it?s easier to control and faster output. For the beginners, this cutter is probably the best one to learn plasma cutting.

This product comes with an instruction manual, so you can use this product yourself without taking the help of a professional, even if you are new in Plasma cutting. It comes with an internal water separator to help you finish your work perfectly. It can work for hours without any mechanical failure, and it doesn?t leave behind any slag. It is very easy to set-up, you can set up this Cutter in a fraction of seconds and start working in it.

Cutting Mechanism

To boost up the speed while cutting metals, this Cutter is given all the required features. Its Cutting mechanism can be called an enhanced automatic Plasma cutting mechanism. It can even cut through expanded metals quickly because of it?s Rapid air restrike feature and can also cut through gaps as well.

It has an air regulator and a pressure gauge to enhance the metal Cutting experience. All these features contribute to make it a modern-day Cutter.

Safety features

The makers describe this Cutter as the safest one; it is practically True. Sometimes it protects the user even if it is a mistake from the user?s end.

For a Cutter at this price range, it becomes very important that the Cutter provides enough durability to ensure the financial safety of the user. All the measures have been taken to ensure that this product runs long. Also, it is ensured that every single part includes in this Cutter face no damage, even in extreme environments.

However, exposure of the Plasma beam to the naked eye can cause damage to the eyes, so it is very important to ensure safety from your end too. You can?t blame any machinery for every kind of damage.

Pros

The continuous output control feature helps you to work on different metallic thickness. Easy to set up and easy to use. Extended warranty. Powerful arc restrike feature. A new electrode and nozzle design save a lot of money for daily users. Relatively faster operations. I can work for hours continuously. It comes with an internal water separator.

What we really like about this cutter

The main feature that we liked about this cutter is that it has all those features which we find in 2 and 3 different plasma cutters collectively. It saves a lot of money if you are a professional and you know how important are the features of this product for you.

Universal acceptance is the other main feature of this Cutter. For a professional it?s modern features can save a lot of money and time, for a first time user, it is the easiest plasma cutter to use.

Cons

Many nozzles and electrodes need to be purchased separately. Price may not be acceptable for non-regular users. Doesn?t come with extra storage box, like other cutters in the market. Works on a slightly shorter band of voltage. While working on specific metals, the noise can disturb others.

What we really didn?t like about this tool

Price is acceptable, but not for everyone. A first time user looking for a plasma cutter will find that some cutters are available at nearly half of its price.

But that is not the real truth about this cutter. The price is high because of the features involved in this Cutter. It is specifically designed to save time and money for the user. For a user, who wants to take the commercial advantage of this product, this price range will be a perfect one to invest.

Who should buy it

It can be used by anyone who needs detailed and precise cuts on the metals. It is good for metallic artwork, metal cutting fro industrial needs, for a handyman, a professional. It can be transported easily, so every individual can use it.

Its cuts are detailed and are beneficial for everyone in the metal cutting profession. Also, timelessness gives this cutter an added praise from the users.

Eastwood Versa cut 60 Plasma Cutter is a versatile and portable plasma cutter from Eastwood. It designed to cut through steel, aluminum, and stainless steel from 0.010 to 0.875 inches precisely and efficiently. It is well designed to give you the finest cut quality through curved and intricate surfaces as well as rusted surfaces.

This plasma cutting tool is relatively faster and efficient than mechanical cutting methods. A plasma cutter, which is not complicated as other ones, ensures that everybody can easily use it. Also, it gives cleanest cuts without leaving behind any slag.

It is built to employ multiple applications in a single tool and covers a varied range of metallic thickness. It is far better than the traditional plasma cutters and has all the features of a modern plasma cutter. The modern features of this product can be useful for you in the long run.

Key features and description

Build quality and design

This tool has a rated 220 volts input and 60 amp output. It is built very compactly and lightweight with the dimensions of 19.5 in L X 14.5 in H X 8.5 in W and weighs 45 lbs. It can cut up to 7/8? thick material.

It comes with a heavy-duty Mosfet inverter and an internal moisture separator. It also includes a self-starting arc that can be used on the exhaust systems and floor panels where rust is often an issue. It also comes with a 20-foot torch and 10-foot ground cable.

Its built-in pilot arc system ensures instant air striking, and internal moisture separator provides clean, dry air at the torch to provide better output.

Ease of use

All the modern features discussed above are only provided to give you the comfort of using it. It is beautifully designed for all kinds of users, whether it is an experienced professional or a newbie. Its fast-paced operational speed and efficiency make it easy to finish multiple jobs in relatively lesser time.

Its torch fits the hand nicely and works very smoothly. It?s compact size, and lower weight makes it easy to shift at other places.

It gives efficient results over a more extended period. Also, it lesser prone to damage and fluctuations. Also, it is easy to switch this tool to work on different meta

Cutting Mechanism

This plasma cutter comes with some additional features, which are an updated version of an ordinary cutting mechanism in traditional plasma cutters. This tool features a built-in pilot arc, which produces instant arc and cuts aluminum, Stainless steel, and other materials with ease. These features also make it a unique plasma cutter to look for.

This product employs the mechanism to overcome the difficulties encountered in ordinary plasma cutters. Also, it works on an automated system to ensure that every user can use it without any hassle.

Safety features

You can definitely trust this plasma cutter to give you no damage from its end. Also, it is safe to use this tool in the long run. Eastwood has used the finest quality materials in it to ensure you zero leakage even in the most intense jobs.

Also, it is safe to use this plasma cutter on all the metals where it is permissible to use. Also, it doesn?t deviate from its actual functions to give you a risk-free user experience. For added safety, you must also ensure Safety from your end too. This product comes with a user manual, which you should follow to ensure complete safety.

Pros

• Compact design.
• The built-in arc pilot system provides better results while working on rusted, rugged, and painted surfaces.
• Internal moisture separator to provide clean cuts.
• Heavy-duty inverter.
• 10-foot ground cable to provide more flexibility to the user.
• Easy to set up and easy controls.
• It comes with a standard 220 V plug.
• Comparatively cheaper than other similar products.
• It comes with a handy 20-foot torch.3-year warranty.

What we really like about this tool.

The built-in pilot arc system and internal moisture separator are the two best features among other features of this plasma cutter. These two features give the user a hassle-free user experience, even on the most complicated surfaces. Also, it never compromises with its cut quality on these surfaces too.

Moreover, it can be used even on the curved surfaces with the highest possible precision of a plasma cutter. Also, this type of cutting quality is very rare in plasma cutters. The fast cutting technology is also a major feature that we loved about this tool. Also, it comes with a heavy-duty Mosfet inverter to give you efficient results. This product is a perfect combination of multiple features.

Cons

• A weight that may not be suitable for everyone to carry.
• The price tag may be higher for those who don?t need to use it regularly.
• Laser cutters have finer cut quality.
• It doesn?t come with extra nozzles and electrodes.
• 10-foot longer cable may feel slightly longer.

What we really didn?t like about this tool

This product doesn?t come with extra nozzles and electrodes. But those can be bought easily online and are not much expensive.

Also, this price range is suitable for you if you are a professional user of this product, and you require this product in the long run. For those who seek to purchase this product for infrequent use, this product can be slightly expensive.

Who should buy it

The makers of the product have made it sure that everybody can use it easily. Because of its versatility, this product can be used by a variety of users. It is a perfect tool for a handyman, a professional, for mechanic shops, for garages, etc. All the users will find it easy to use this tool.

This plasma cutter is very easy to be operated by an amateur. But, for the professionals, this product can be really profitable because this product has multiple applications. If you are looking for a modern-day plasma cutter, this product is designed specifically for you.

Cutmaster 52 is a modern and versatile Plasma cutter from Thermal Dynamics. It is one of the most powerful yet lightweight Plasma cutter available in the market. Thermal Dynamics has given it all the features to make it competitive among the flagship Plasma cutters in the market.

It can cut up to inch metal and can shear up to 1/8 inch. It especially made for professionals, but the newbies will also find it the most accessible tool to handle. As we know, the Plasma cutting mechanism doesn?t provide the finest cut quality as compared to other methods of metal cutting like laser cutting. Still, this tool offers the highest level of cut quality in plasma cutting.

This tool comes with the idea to provide True cut capacity. That means you don?t need to purchase a machine having more capacity than your needs. It is made to help you for hours without compromising with its durability.

Key features and description.

Build quality and design

This Plasma cutter is built compact, durable, and lightweight. The dimensions being 28 x 15.3 x 24 inches and weight is 43 pounds proves that this tool works on a multi-voltage supply from 208 to 480 volts.

This tool also comes with an LED panel on the front to indicate the working conditions. The roll bar in this Plasma cutter offers the easiest mobility and protects it from damages during transport. It also comes with ATC disconnect to easily add lead extensions.

The 20 ft. Long leads will help you to use it flexibly. It also comes with a storage compartment to put all your spare parts and consumables. All these features will altogether give you high-end functioning.

Ease of use

This tool gives you comfort during your operations on metals. The smooth handling and easy portability will surely give lesser fatigue during your work. Also, the LED panel will show you what?s happening around there to save your time and effort.

The storage compartment provided with this plasma cutter will make it easy to store consumables and spare parts. Also, the functioning over a varied voltage will help you to use it over multiple power supply. This Plasma cutter is quick enough to save your lot of time and advanced enough to keep your efforts.

Cutting Mechanism

As we know, the Plasma cutting mechanism works on the concept of cutting the metal through hot Plasma. But this machine upgrades this mechanism to the next level. It can work for hours with the same perfection because of its trigger latch features.

While cutting through expanded metals, it?s autopilot restart feature automatically reunites the pilot arc. This, it cuts through expanded metals easily.

For different metals of different dimensions, you can use different torches. It is perfect for cutting metals like steel, aluminum, copper, etc. Even the Amateurs will be able to cut through different metals with ideal precision.

Safety features of this cutter

Plasma cutting requires safety and reliable machinery. This plasma cutter is certified for its protection. The strong build and material quality promise no damage to you during its lifetime.

All the parts are correctly insulated. Even in the most extreme conditions, it will never do any damage to you. All the wires and leads are made with the finest quality materials to ensure proper safety.

It ensures the safety of metals as well. You will only get the required results on the metals. Some personal protection is also required while using it. You must follow all the safety guidelines provided in the booklet along with this product.

Pros of this cutter

• It can be operated in multiple voltages ranging between 208 to 480 volts.
• It comes with a storage container to put consumables and spare parts.
• It comes with a 4-year warranty while other similar products come with a 3-year warranty.
• 20 ft. Long cable
• Minimal weight.
• Rollbar provides easy transportation.
• It comes with an autopilot restart feature.
• Do faster operations.

What we really like about this tool

Its autopilot restart feature is the unique feature of this tool. When it comes to Extended metals, this tool does it?s work nicely with the help of this feature. Its automation saves a lot of time for the user.

Also, it?s LED indicator makes it a perfect modern-day tool. This indicator ensures beautiful working and ideal set up of this machine. Using a plasma cutter with an LED indicator enhances user experience.

Also, it is easy to be used by the newbies. It is so easy to set up that you can start using it in a couple of moments.

Cons of this cutter

• It doesn?t come within a built-in air compressor.
• A higher price tag. Not perfect for rusted metals, can cause a lot of noise.
• Not perfectly lightweight for all the users
• Plasma cutters have low precision in cutting as compared to laser cutting.

What we really didn?t like about this tool

The price tag is relatively higher as compared with other Plasma cutters. But its features add to its cost. However, if you are a professional and need this tool, then you must go for it; it will give you long term benefits.

Also, some cutters provide a built-in Air compressor in this price range. But it will always give you the finest results.

Who should buy it

It is made for all plasma cutters. It?s universal applications over different metals, and faster results are the two main features that everyone will like. It can be used by a handyman, a professional, in a factory.

You don?t need any special skills while using it. Everybody can purchase it. But it is specially made for professionals.

It can save a lot of time and energy in the long run. Also, it?s durability and reliability will ensure that you don?t need to purchase any other plasma cutter for years. For professionals, it is not a purchase; rather, it is an investment.